Warning - Buell S1 Lightning Workshop Manual

VACUUM-OPERATED ELECTRIC SWITCH (V.O.E.S)
ADJUSTMENT/TESTING
See VACUUM-OPERATED ELECTRIC SWITCH (V.O.E.S)
Section 1.
REMOVAL
1. Remove seat and fuel tank. See
in Section 4.
2. See Figure 7-4. Disconnect V.O.E.S. connector [P7] from
main wiring harness.
3. Remove V.O.E.S. from carburetor.
INSTALLATION
1. See Figure 7-4. Place a new V.O.E.S. on carburetor.
2. Attach V.O.E.S. connector [P7] to main wiring harness.
1

WARNING

After installing seat, pull upward on front of seat to be
sure it is locked in position. If seat is loose, it could shift
during vehicle operation and startle the rider, causing
loss of control and personal injury.
3. Install fuel tank and seat. See
TION in Section 4.
7-10
in
FUEL TANK, REMOVAL
FUEL TANK, INSTALLA-
b0225x7x
ELECTRONIC
IGNITION MODULE
TIMER
AND PICKUP
R/W BK
GN /W
P10
8 7 6 5 4 3 2 1
A B C
[P7] WIRE TERMINATION
1 Ignition module
2 Splice number one
Figure 7-4. V.O.E.S. Connector [P7]
VACUUM
SWITCH
BK
BK
P7
2 1
/W
P16