Cp Card Leds - HP AA-RS2WC-TE Installation Manual

Operating the Core Switch 2/64
Table 9: 16-Port Card LED Patterns (Continued)
Location
of LED on
Card

CP Card LEDs

The Control Processor card contains four LEDs: a CP card power LED, a CP card
status LED, a link status and activity LED, and a link speed LED. See
on page 107 and
Note:
tests.
106
Purpose
of LED
Slow-flashing
yellow
(on 2
seconds; off
2 seconds)
Fast-flashing
yellow
(on 1/2
second; off
1/2 second)
Alternating
green and
yellow
Table 10 on page 108.
The LED patterns may temporarily change during POST and other diagnostic
Color of Status of
LED Hardware
Port is disabled
(diagnostic tests or
portDisable
command).
Transceiver or port is
faulty.
Port is bypassed.
Core Switch 2/64 V4.1 Installation Guide
Recommended
Action
Reset port from
workstation.
Change
transceiver or
reset switch from
workstation.
Reset port from
workstation.
Figure 23