HP AA-RS2WC-TE Installation Manual page 195

16. Import the volume groups using the vgimport command with the following
17. Activate the volume groups using vgchange command with the following
18. If you are not using multipathing software, mount all devices again and restart
Note:
preceding steps do not "clean up" the results from ioscan. When viewing the output of
ioscan, notice that the original entry is still there, but now has a status of NO_HW.
Core Switch 2/64 V4.1 Installation Guide
syntax:
vgimport -m <map file> <path to volume group> <physical volume
path>
For example:
vgimport -m /tmp/jbod_map /dev/jbod /dev/dsk/c64t8d0
/dev/dsk/c64t9d0
syntax:
vgchange -a y <path to the volume group>
For example:
vgexport -a y /dev/jbod
I/O. For example:
mount /mnt/jbod
If you are using multipathing software, re-enable the affected path. The
# ioscan -funC disk
Class I H/W Path
Description
disk 0 0/0/1/1.2.0
ST39204LC
disk 1 0/0/2/1.2.0
304
disk 319 0/4/0/0.1.2.255.14.8.0
SEAGATE ST336605FC
/dev/dsk/c64t8d0 /dev/rdsk/c64t8d0
disk 320 0/4/0/0.1.18.255.14.8.0 adisk NO_HW
SEAGATE ST336605FC
/dev/dsk/c65t8d0 /dev/rdsk/c65t8d0
Driver S/W State
adisk CLAIMED
/dev/dsk/clt2d0
adisk CLAIMED
/dev/dsk/c3t2d0
adisk CLAIMED
Technical Specifications
H/W Type
DEVICE
/dev/rdsk/c1t2d0
DEVICE
/dev/rdsk/c3t2d
DEVICE
DEVICE
SEAGATE
HP DVD-ROM
195