Reinstalling The Chassis Door; Securing The Chassis Port Side To Rack Rails - HP AA-RS2WC-TE Installation Manual

Installing and Configuring the Core Switch 2/64
3. Secure the chassis' port side to the rack rails using two #10-32 x 5/8 inch
Figure 11: Securing the chassis port side to rack rails
4. Tighten the screws, and torque to 32 inch-pounds. See

Reinstalling the Chassis Door

1. Verify that the spring-loaded pins on both door hinges are retracted (push
2. Align the door hinges with the chassis portion of the hinges.
3. Push the levers out of the notches to release the pins.
60
screws on each side.
locations.
levers into notches).
SHR-2514A
Figure 11
Core Switch 2/64 V4.1 Installation Guide
for screw