Table of Contents
Advertisement
Installing Core Switch 2/64 FRUs
Note:
orientation. If transceiver does not slide in easily, ensure it is correctly oriented. For
instructions that are specific to the transceiver model, refer to the transceiver
manufacturer's documentation
Figure 44: Replacing a fiber cable
4. Position the cable so that the key (the ridge on one side of the cable
Note:
If a cable does not slide in easily, ensure it is correctly oriented.
5. Repeat
158
Transceivers are keyed so that they can only be inserted with the correct
connector) is aligned with the slot in the transceiver, then insert into the
transceiver until the latching mechanism clicks.
Cables are keyed so that they can only be inserted with the correct orientation.
step 1
through
.
SHR-2517A
step 4
for additional SFPs.
Core Switch 2/64 V4.1 Installation Guide
Advertisement
Table of Contents
