Diagnosing With The Leds - HP CX 6300 Installation And Getting Started Manual

tree, GVRP, LACP, and other features may put the port in a blocking state.
Use the switch console to determine the port configuration and verify that there is not an improper or undesired
configuration of any of the switch features that may be affecting the port.

Diagnosing with the LEDs

Table 13: Front Panel LED Behavior
Switch LEDs
Back LED Status of modular components installed in
the back of the chassis (not applicable for
6300F switches
PoE LED Indicates Port LEDs are showing PoE
information (not applicable for non PoE
switches)
Spd LED Indicates Port LEDs are showing speed
information
Stk LED Indicates Port LEDs are showing stacking
mode information
Function State
On - Green Normal
Slow Flash - Amber Fault in one of the
modules in the back
of the chassis
Off PoE mode not
selected
On - Green PoE mode selected
Slow Flash - Amber Hardware failure
PoE enabled port,
PoE mode not
selected
On - Amber Hardware failure
PoE enabled port,
PoE mode selected
Off Speed mode not
selected
On - Green Speed mode
selected
Not Implemented No fault defined
Off Stacking mode not
selected
On - Green Stacking mode
selected
On - Amber A port has a
stacking failure.
Stacking mode
selected
Slow flash Amber A port has a
stacking failure.
Stacking mode not
selected
Meaning
Troubleshooting | 47