Table of Contents
Advertisement
Note:
passwords. The same administrative account applies to both logical switches. If the
password is changed on switch 0, it is automatically changed on switch 1.
Note:
Core Switch 2/64 V4.1 Installation Guide
c. Connect the other end of the serial cable to a serial port on the
workstation.
If necessary, the adapter on the serial cable can be removed to allow for
an RJ45 serial connection.
d. Open the terminal emulator application and configure as described in
these steps.
— For Windows operating systems, enter the following parameters:
Parameter
Bits per second
Databits
Parity
Stop bits
Flow control
— For most UNIX systems, enter the following string at the prompt:
tip /dev/ttyb -9600
e. When the terminal emulator application stops reporting information, press
Enter to reach the CP0 Console Login prompt.
f.
Enter the administrative logon information. The default administrative
logon is admin and the default password is password.
g. Enter 0 at the login prompt.
At the initial login the user is prompted to enter new Admin and User
h. Modify passwords if desired. Passwords must be a total of 8 to 40
characters long, and should include a combination of numbers and upper
case and lower case letters
Press CTRL-C to skip modifying the password.
Installing and Configuring the Core Switch 2/64
Value
9600
8
None
1
None
.
77
Advertisement
Table of Contents
