Installing Core Switch 2/64
FRUs
The Core Switch 2/64 does not require regular maintenance, and is designed to
minimize loss of connectivity within the SAN. If any failure does occur, a number
of components are available as field replaceable units (FRUs).
The power supplies, port cards, CP cards, and blower assemblies can all be
replaced in the field without special tools. Replacement instructions are provided
with all replacement units ordered. The Core Switch 2/64 can continue operating
during the FRU replacements if the conditions specified in the corresponding
procedures are followed.
This chapter describes replacement procedures for the following FRUs:
Core Switch 2/64 V4.1 Installation Guide
FRU
Summary, page 122
Cable Management Tray
Summary, page 159
4
121