Usb-A Aux Port; Chassis And Port Leds On The Front Of The Switch - HP Aruba Networking 9300-32D Installation And Getting Started Manual

To use this port, the switch must have an IP address. IP settings can be configured through a console port
connection or automatically from a DHCP/Bootp server.
A networked out-of-band connection through the management port allows you to manage data network
switches from a physically and logically separate management network.
For more information, see the Fundamentals Guide for your switch.

USB-A Aux Port

The USB-A port is used for file management, downloading switch software or use of Aruba accessories. This
port uses a USB Type-A connector.

Chassis and Port LEDs on the front of the switch

Figure 1 Chassis and Port LEDs for the Aruba 9300-32D
Label Description
1
Unit Identification/Locator LED
2
Global Status LED
3
Power Supply 1 Status LED
4
Power Supply 2 Status LED
5
Fan Status LED
6
Reserved for future use
7 Out-Of-Band-Management Link/Activity LED
8
QSFP56-DD port indicator LEDs
9
SFP+ port indicator LEDs
Introducing the Switches 9
|