Table of Contents
Advertisement
Restoring the System Configuration Settings
Use these steps to restore the configuration settings from a backup.
Note:
backups and updates via FTP only.
1. Verify that the FTP service is running on the host workstation.
2. Login to the switch as the admin user.
3. Shut down the switch. At the command line, enter:
4. At the command line, enter:
5. Follow the onscreen prompts, for example:
6. Reboot the switch. At the command line, enter:
Core Switch 2/64 V4.1 Installation Guide
The Core Switch 2/64 running Fabric OS V4.0 or later supports firmware
switchdisable
configdownload
Server Name or IP Address [host]: 192.168.15.42
User Name: [None} user21
File Name [config.txt]: config-file.txt
Password: xxxxxxxx
The download complete prompt displays, indicating a successful download.
reboot
Running Routine Operations
165
Advertisement
Table of Contents
