Table of Contents
Advertisement
The bezel protects the card and identifies each of the LEDs on the WWN card.
Together, the WWN card and bezel assembly provide a consolidated view of the
LEDs for the two CP cards, eight port cards, and four power supplies. If a slot
contains a filler panel, the corresponding LEDs on the WWN card are not
illuminated.
Note:
chassis by screws, and the other version is held on by the pressure of the bezel against
a pad on the card face.
Core Switch 2/64 V4.1 Installation Guide
There are two possible versions of the WWN card; one is attached to the
Caution:
If the WWN card fails, follow the instructions provided with the
replacement card. Wear a grounded ESD strap when handling the card (a
grounding connection is available on the chassis above the power
connectors). Do not reboot the switch while the WWN card is uninstalled, as
this can cause the switch to boot incorrectly.
Operating the Core Switch 2/64
97
Advertisement
Table of Contents
