Sending/Saving Separately Scanned Documents
Together (Job Build)
1
Place the first original.
2
Press <Scan and Send> on the Main Menu.
3
Specify the destination on the Scan Basic Features screen.
Screen(P. 408)
4
Specify the scan settings as necessary.
Originals(P. 411)
5
Press <Options>
6
Press
to scan the original.
➠
When scanning is complete, the screen appears prompting you to scan the next original.
7
Place the next original and press
●
Repeat this step until you finish scanning all of the originals.
●
To change the scan settings, press <Change Settings>.
8
Press <Start Sending>.
➠
All scanned documents are combined into one and sent/saved to the specified destination.
Scanning
Even if you have too many originals to be placed in the feeder at the same time, you
can scan the originals separately and send/save them as a batch of documents.
Originals scanned with both the feeder and the platen glass can also be sent/saved
at the same time.
Placing Originals(P. 106)
<Job Build>
<Close>.
.
439
<Main Menu> Screen(P. 94)
Scan Basic Features
Basic Operations for Scanning
13WK-07Y