Specifying Moving Distance
If no blank space exists because the original image and the output paper are the same size, or if you want to shift
images by a few millimeters, specify the moving distance.
1
Place the original.
2
Press <Copy> on the Main Menu.
3
Press <Options> on the Copy Basic Features screen.
Screen(P. 208)
4
Press <Shift>.
5
Press <By Numeric Keys> and specify the moving distance.
●
Press <Set> in <Front Side> and specify the moving distance. Press the up/down/left/right buttons indicating
directions and enter the moving distance using the numeric keys.
●
If you want to move the image on the back side when copying both sides, the <Back Side> setting is needed.
To move to the same position as the front side, press <Same as Front Side>. To move symmetrically, press
<Opposite to Front Side>. To move to a position different from the front side, press <Set> and enter the
moving distance.
6
Press <OK>
7
Press
.
➠
Copying starts.
LINKS
Setting Binding Margins(P. 260)
Placing Originals(P. 106)
<Close>.
Copying
<Main Menu> Screen(P. 94)
Copy Basic Features
269