●
Pressing <-> and <+> makes the detection accuracy lower and higher, respectively. When text and images on
the original are faint, set a lower level of detection, and when dark borders and dirt appear on the original,
set a higher one.
8
Press <OK>
<Close>.
9
Press
.
➠
Originals are scanned and sending/saving starts.
●
If the size of the original is smaller than the scan size setting, it may not be skipped correctly.
●
To check the number of pages that have been sent/saved, follow the procedures below:
<Job Log>
select a document
The status screen and Communication Management Report display the number including blank paper.
Checking Status and Log for Scanned Documents(P. 424)
Scanning
<Details>
check the number displayed for <Send Pages>
443
<Send>