Replacing The Staples (Optional) - Canon imagerunner advance C5550i User Manual

Hide thumbs Also See for imagerunner advance C5550i:

Table of Contents

Replacing the Staples

When the staples in the finisher have run out, an icon prompting you to replenish the staples is displayed on the

bottom right of the screen. Press the icon, and follow the instructions on the screen to replenish the staples.

Replacing the Staples of the Staple Finisher(P. 852)

Replacing the Staples of the Booklet Finisher(P. 854)

Replacing the Staples of the Inner Finisher(P. 859)

Copies and prints may be output to optional equipment while you are replacing the staple. Take care when

handling the optional equipment installed to the machine.

Do not remove the tape securing the staples until instructed to do so in the procedure described below.

For information on the product number for the staples, see

You can check the current amount of staples remaining.

Checking the Remaining Amount of Staples(P. 862)

Consumables(P. 898) .