Canon imagerunner advance C5550i User Manual page 55

● If there is a secondary DNS server, enter its IP address. You cannot enter addresses that begin with
"ff" (multicast address), addresses that consist of only "0," or local link addresses. This column can be
left blank.
3
Press <OK>.
4
Specify the machine's host name and domain name.
1
Press <DNS Host/Domain Name Settings>.
2
Carry out the necessary settings.
<IPv4>
● Press <Host Name>, and enter the host name of the machine to register on the DNS server using
alphanumeric characters.
● Press <Domain Name>, and enter the domain name which the machine belongs to using
alphanumeric characters
<IPv6>
● To set the host name and domain name to be the same as IPv4, press <On> in <Use Same Host Name/
Domain Name as IPv4>. To set to be different from those of IPv4, press <Off>.
● To set the host name to be different from IPv4, press <Host Name> and enter the host name of the
machine to register on the DNS server using alphanumeric characters.
● To set the domain name to be different from IPv4, press <Domain Name> and enter the domain name
that the machine belongs to using alphanumeric characters.
● If you set <Use DHCPv6> to <On> for the stateful address settings (
Address(P. 35) ), the manually configured domain name is overwritten. If you set <Use Same Host
Name/Domain Name as IPv4> to <On>, the domain name that is retrieved from DHCPv6 server is
used.
3
Press <OK>.
5
Set automatic correspondence updates.
1
Press <DNS Dynamic Update Settings>.
2
Carry out the necessary settings.
Setting Up
(Example: "example.com").
43
(Example: "example.com").
Setting an IPv6