Placing Originals in the Feeder(P. 108)
Placing Originals on the Platen Glass
1
Open the feeder/platen cover.
●
If you place an original for which the opening of the feeder/platen cover is insufficient, the size of the
original may not be properly detected.
2
Place the original face down on the platen glass.
●
Align the corner of the original with the top-left corner of the platen glass.
●
When copying 2-sided original, place the original so that the top and the bottom are properly positioned,
as shown in the illustration below.
3
Gently close the feeder/platen cover.
➠
The original is ready for scanning.
●
When scanning is complete, remove the original from the platen glass.
Basic Operations
107