Canon imagerunner advance C5550i User Manual page 756

<Use FTP PASV Mode>
<Preferences> <Network>
Specify whether to use the FTP PASV mode.
<IPP Print Settings>
<Preferences> <Network>
Specify settings for IPP printing. To use IPP printing, press <On> and set whether to encrypt the IPP
communication data with TLS and whether to use IPP authentication.
● If you set this to <On>, <Use HTTP> is also set to <On>.
● To use TLS communication by setting <Use TLS> to <On>, a key pair to use is required. You can use a
preinstalled key pair or an original key pair generated by the machine as the key to use. For
information on the key to use and the method for generating an original key pair, see
the Key and Certificate for Network Communication(P. 606) or
Certificate for Network Communication(P. 666) .
● To use the IPP authentication function by setting <Use Authentication> to <On>, the user information
of the machine is used as the user and password for IPP authentication. Make sure to register the
user information in advance when using the IPP authentication function.
Information in the Local Device(P. 561)
<Multicast Discovery Settings>
<Preferences> <Network>
Specify the multicast discovery settings.
Systems(P. 58)
<Use HTTP>
<Preferences> <Network>
Enable or disable HTTP setting.
If you set this to <Off>, the following settings are also set to <Off>.
● <Remote UI>
● <IPP Print Settings>
● <Use WSD Scan Function> and <Use WSD> in <WSD Settings>
● <BMLinkS Settings>
● <Use WebDAV Server>
<Use WebDAV Server>
<Preferences> <Network>
Settings/Registration
<TCP/IP Settings>
Setting the PASV Mode of FTP(P. 57)
<TCP/IP Settings>
<TCP/IP Settings>
Monitoring the Machine From Device Management
<TCP/IP Settings>
<TCP/IP Settings>
744
Generating
Registering a Key and
Registering User