Registering the Device Information Destinations
On the host machine, register the client machines that will receive the distributed device information. Administrator
privileges are required in order to perform registration.
1
Press
.
2
Press <Management Settings>
Distribution Settings>
3
Register the destination client machines.
1
Press <Auto Search/Register>.
2
Search for the destination client machines.
●
Press <->/<+> for <Search Depth (Router)> to specify the search range, then press <Start Auto Search>.
➠
The multifunctional printers on the network are displayed.
3
Select the device information destinations (clients) in <Destination>, and press <OK>.
●
Press <Display Host Name> to display the host names for the multifunctional printers shown in
<Destination>.
Registering destinations manually
When destinations (clients) cannot be searched automatically, you can register them manually by entering
the IP address or domain name.
1
Press <Register>.
2
Enter the IP address or domain name of a destination (client), and press <OK>.
●
When entering the domain name, make sure to enter the entire name, including the domain,
subdomain, and host name.
●
If a connection cannot be established with a specified destination, or if it is configured not to receive
device information, the <Could not retrieve the device information details. Do you want to register the
device as a destination?> message is displayed. If you press <Yes>, the destination can be registered
but the device information cannot be distributed.
Managing the Machine
<Device Management>
<Register Destinations>.
716
13WK-0ER
<Device Information