Canon imagerunner advance C5550i User Manual page 954

Session timed out. Wait a moment, then try to access the database again.
The session timed out because the specified length of time elapsed.
● Try accessing again after waiting a while. If the session continues to time out, restart the machine.
Cannot complete searching due to timeout. Check the settings.
The search could not be completed within the specified time.
● Increase the length of the timeout time in <Search Timeout> in <Register LDAP Server>.
Registering the LDAP Server(P. 49)
Time Stamp Server Connect. Error
The URL of the time stamp server is incorrect.
● Check the settings of the time stamp server, and specify the correct URL.
The time stamp server is not responding.
● Check whether the time stamp server is operating normally.
Could not connect to the time stamp server because the network was disconnected.
● Check whether the LAN cable is connected correctly. If you had to connect it again, restart the machine.
Connecting to a Wired LAN(P. 23)
The DNS server is not set correctly.
● Check whether the address of the DNS server is set correctly in <IPv4> or <IPv6>.
Making DNS Settings(P. 42)
The proxy server is not set correctly.
● Check the proxy server settings.
An error occurred while communicating with the time stamp server.
● Check whether the time stamp server is operating normally.
Adjusting gradation... Wait a moment.
The machine is performing auto adjustment.
● Printing will automatically resume when the adjustment is complete. Wait a while.
Could not access the database. Restart the device.
Failed to access the user database because it is corrupt, etc.
● Restart the machine.
Digital Sig. Cert. Access Error
Could not access the user certificate when sending the user signature.
● Check the content of the user certificate registered in the machine.
Registering a User Signature Certificate(P. 644)
Could not access the device certificate when sending the device signature.
● Check the content of the device certificate registered in the machine.
Troubleshooting
942