Checking The Connection To The Recipient Before Sending (Direct Send) - Canon imagerunner advance C5550i User Manual

Checking the Connection to the Recipient Before
Sending (Direct Send)
1
Place the original.
● To send multiple pages, place the originals in the feeder. When the original is placed on the platen glass, only
one page can be sent.
2
Press <Fax> on the Main Menu.
3
Specify the destination on the Fax Basic Features screen.
Screen(P. 316)
4
Specify the scan settings as necessary.
5
Press <Options>
6
Press .
➠
The machine dials the recipient's number. When the machine connects the call, originals are scanned and
sending starts.
● The machine does not start sending when the recipient's line is busy.
Direct Send is not available in the following cases
● Any of the following scan settings are specified: <2-Sided Original>/<Different Size Originals>/<Erase
Frame>/<Job Build>/<Delayed Send>/<Finished Stamp>
● Multiple destinations are specified.
● <Limit Functions> is set to <Off> for any function when the machine is in the Department ID mode.
Configuring the Department ID Management Settings(P. 585)
Faxing
To successfully send faxes to the destination you intend, you can check beforehand
that the recipient is connected and ready to start communication. As the machine
bypasses memory when scanning originals, you can send faxes even if there is no
memory available.
Placing Originals(P. 106)
<Main Menu> Screen(P. 94)
<Direct Send>.
338
Fax Basic Features
Basic Operations for Sending Faxes(P. 319)
13WK-05Y