Canon imagerunner advance C5550i User Manual page 586

● When [IC Card (Assumed Authentication)] is selected, login is performed using only the information
registered on the IC card, and logged-in users can operate the machine with general user privileges.
● When using an external authentication server, select [Server] and specify the type of server.
[Display Button on Settings Menu:]
Select the check boxes for the buttons to add to the menu that is displayed when pressing
right corner of the login screen.
[Allow IC card authentication of other users while a user is logged in]
Select the check box to allow a user to log in to the machine with an IC card, even if another user is already
logged in. If this function is enabled, the previously logged-in user is automatically logged out when the IC
card is touched to the reader. This is not available when the machine is configured to perform authentication
for separate functions.
[Specify a domain at authentication]
Select the check box to allow users to specify the domain of the login destination on the IC card
authentication login screen.
[Refer to the local device when a user is not registered]
Select the check box to allow users to log in using the local device user information, even if they are not
registered on the authentication server.
[Allow use of temporary card]
Select the check box to allow users to associate a temporary card with their account and temporarily log in to
the machine if they have forgotten their card, etc. Set the expiration period of the temporary card
accordingly. To configure this function, specify the following settings in advance. If you deselect the check
box, the associations of all temporary cards are canceled.
● [Use the user authentication function] is set to [On].
● [Picture Login] in [Authentication Functions to Use] is set to [Off].
● [IC Card Authentication] in [Authentication Functions to Use] is set to [On].
● [Local Device Authentication] in [IC Card Authentication]
● [Register IC Card] in [IC Card Authentication]
● If another user is associated with a temporary card before the card expires, the association with the existing
user is canceled.
● Only one temporary card can be associated with an account at a time. If an account is associated with
another temporary card, the association with the existing temporary card is canceled.
[Register user information from the server to the IC card authentication
destination]
Select the check box to associate user information obtained from the server with card information and
register it to the machine in an environment in which you can perform authentication to an Active Directory
or LDAP server from the machine (
information, etc. Make sure to also select the server to use. To configure this function, specify the following
settings in advance.
● [Use the user authentication function] is set to [On].
● [Picture Login] in [Authentication Functions to Use] is set to [Off].
● [IC Card Authentication] in [Authentication Functions to Use] is set to [On].
Managing the Machine
*
[Authentication] is set to [On].
[Display Button on Settings Menu:] is set to [On].
Registering Server Information(P. 565) ), but cannot write card
574
on the top
*