Installation Instructions; Unpacking And Inspection - Cleveland steamcraft 21-CET-8 Service Manual

INSTALLATION INSTRUCTIONS

Unpacking and Inspection

After selecting the SteamCraft 3.1 operating location, the steamer can be
unpacked, positioned, and installed. After Final Setup and Checkout, the
SteamCraft 3.1 will provide years of reliable operation.
1. Before unpacking the shipping carton, visually inspect it for damage.
• If the shipping carton appears damaged, do not open the carton.
Refer to the Shipping Damage Instructions on page 10.
• If the shipping carton is undamaged, proceed with step 2.
2. Slit the four comers of the carton and peel carton-sides away from the
SteamCraft 3.1. The slide racks and legs are shipped in separate
packing on top of the unit. Be careful not to damage or throw away
these unassembled parts.
3. Remove the carton from the top of the unit The package contains two
slide racks as illustrated in Figure 2-5. These racks are shipped in
separate packing on top of the unit
4. The SteamCraft 3.1 adjustable legs are also shipped on top of the unit in
pockets at the edges of the packing. Refer to Figure 2-6.
5. Open the door of the SteamCraft 3.1. Several pre-assembled parts can
be seen inside the unit. Refer to Figure 2-7. Do not remove the Drain
Screen, Steam Nozzles, and Slide Rack Mounting Pins.
6. Inspect the SteamCraft 3.1 and parts for damage or loss.
• If you discover or suspect shipping damage or loss, refer to the
Shipping Damage Instructions on page 10.
• If all items are accounted for and undamaged, place the packaged
slide racks inside the cooking compartment, and proceed to Position
and Level The SteamCraft 3.1.
Model 21-CET-8 Service Manual Page 9