Chapter 6. Illustrated Parts Lists; Introduction; Parts Differences Among Steamcraft 3.1 Steamers; Electrical Schematics And Wiring Diagrams - Cleveland steamcraft 21-CET-8 Service Manual

INTRODUCTION

Parts Differences Among SteamCraft 3.1 Steamers

Electrical Schematics and Wiring Diagrams.

CHAPTER 6. ILLUSTRATED PARTS LISTS

This chapter illustrates replacement parts for the Cleveland Range model 21-CET-8
counter type convection steamer known as the SteamCraft 3.1. Each figure
illustrates a group of functionally related components. Figure 6-1 identifies these
component groups, and the figure(s) on which they are illustrated. Each figure is
accompanied by a component parts list which includes the part name, part ordering
number, and quantity used in that component group.
In the normal course of product improvement, component differences develop.
Usually improved components are designed to be compatible with the existing
structures. When this happens, the improved parts are provided automatically under
the old part numbers. When this is not possible, the parts differences are tracked
and identified by steamer serial numbers. These differences are noted in the
illustrated parts lists. Refer to Chapter 1 for an explanation of Cleveland Range
serial number notation.
In addition to parts illustrations, SteamCraft 3.1 electrical schematics and wiring
diagrams are included at the end of the chapter.
Model 21 -CET-8 Service Manual Page 101
Printed 12/90