SPECIAL FEATURES: TIGHTENING TORQUES (m.daN)
Lubrication circuit
Oil pump
Stage 1: Position the screws and do them up by hand.
Stage 2: Pre-tighten the screws
Stage 3: Tighten the screws
Stage 4: Repeat the tightening a few times in the same order to obtain
a tightening torque of 0,8 m.daN on all the screws.
Engine: XFW
B1BK3B6D
Respect the sequence of stages and the order of tightening
: 0,5.
: 0,8.
53
Cooling circuit
Coolant pump
Stage 1: Position the screws and do them up by hand.
Stage 2: Pre-tighten the screws
Stage 3: Tighten the screws
Stage 4: Repeat the tightening a few times in the same order to obtain a
tightening torque of 0,8 m.daN on all the screws.
C8
B1BK3B7D
: 0,5.
: 0,8.