Table of Contents
Advertisement
C5
B1BP310C
B1BP2V3D
CHECKING AND SETTING THE VALVE TIMING
[1] Camshaft setting peg
[2] Crankshaft setting peg
[3] Timing belt retaining pin
[4] Adaptor for angular tightening
[5] Hub immobilising tool
[5a]
[5b]
[6] Engine lifting crossmember
Removing.
Disconnect the negative terminal of the battery.
Raise and support the vehicle, front wheels hanging.
Remove the auxiliaries drive belt (see corresponding operation).
Unclip and move aside the fuel supply hose from the timing cover.
Remove the upper timing cover (1).
Position the tool [6].
Suspend the engine.
Remove the RH engine support and the upper timing cover (1).
Turn the engine by means of the screw (3) of the crankshaft pinion (2) to bring it to the pegging
position.
A: Pegging on the manual gearbox.
B: Pegging on the automatic gearbox.
Peg the crankshaft, using tool [2].
118
Engine: RFJ
Tools.
: (-).0194.B
: (-).0189.R
: (-) 0189.K
: 4069-T
: (-).0189.S
: (-).0189.S1
: (-).0189.S2
Advertisement
Table of Contents
