Table of Contents
Advertisement
C5
B1EP1EWC
CHECKING AND SETTING THE VALVE TIMING
NOTE: Check the presence of the keyway (12).
Reposition the timing belt (7) on the crankshaft pulley (1).
Hold the timing belt (7) in place using tool [3].
Fit the timing belt (7) in place, respecting the following order:
- The guide roller (10), the inlet camshaft pulley (6), the exhaust camshaft pulley (5), the coolant pump
(11), the tensioner roller (8).
NOTE: Make so that the belt (7) is as flush as possible with the exterior face of the various pinions and
rollers.
Remove:
- Tool [3].
- Tool [1] from the exhaust camshaft pulley.
- Tool [5b] from the tensioner roller (8).
Refit:
- The lower timing cover (4).
- The crankshaft pulley (2).
- Screw (3) of the crankshaft pulley
120
Engine: RFJ
Tightening
: 4 ± 0,4 m.daN
Angular tightening
: 53 ± 4°
using tool [4].
Advertisement
Table of Contents
