Table of Contents
Advertisement
C8
CHECKING AND SETTING THE VALVE TIMING
Engine: RFN
Refitting.
IMPERATIVE: Check that the tensioner roller, guide roller and coolant pump can turn
freely (without play and without tight spots); check also that these rollers are not noisy
and/or that they are not splashed with grease.
If replacing the tensioner roller: Tighten to 3,5 ± 0,3 m.daN.
Turn the tensioner roller, using tool [5a], to go past the slot «c».
Position the tool [5b] to lock the index «b» and remove the tool [5a].
B1EP1BQD
IMPERATIVE: Systematically replace the following components: Timing belt, exhaust
manifold fixing nuts, timing belt tensioner roller nut.
Reposition the timing belt (10) on the crankshaft pinion.
Hold the timing belt (10) in place using tool [3].
B1EP1BRC
126
Advertisement
Table of Contents
