Table of Contents
Advertisement
SPECIFICATION - IDENTIFICATION: SUSPENSION SPHERES
C5
Special features
Identification.
The «slimline» spheres are grey in colour, with multilayer membranes.
IMPERATIVE: It is impossible to recharge or overhaul the «slimline» spheres with nitrogen.
The number marked on the suspension sphere is the component reference and not the Replacement Parts No.
The two-figure number marked on the suspension sphere indicates the initial pressure rating value.
Example:
Suspension sphere
Day in year of
Year of
Time of
Pressure rating
marking
manufacture
manufacture
manufacture
(bars)
HF
066
00
13h59
57
The pressure rating of this type of suspension sphere is given merely as a guide.
When checking, the value read could be higher than the nominal value.
Suspension cylinders on the same axle should be equipped with the same type of suspension spheres.
IMPERATIVE: Tightening torques for suspension spheres
: 2,7 ± 0,5 m.daN.
303
Advertisement
Table of Contents
