Table of Contents
Advertisement
DRAINING - FILLING - BLEEDING: HYDRAULIC SUSPENSION/STEERING CIRCUIT
B3CP06AC
B3CP06BC
Measurement of heights.
Measuring the wheel radius.
To determine the centre of the wheel, place the tool [1] on the heads of the wheel bolts.
Meaure the radius R1 with the tool [2] (distance between the ground and the centre of the wheel).
Measuring the front height H1M.
The front height H1M is measured between the ground and the subframe, at the rear of the front fixing
yokes of the suspension triangle.
Calculating the front height H1C.
Except CARLSSON
CARLSSON
R1 = Radius of front wheel (mm).
Compare:
- The value measured H1M.
- The value calculated H1C.
Adjust the front height if necessary.
317
: H1C = R1 - 140 mm.
: H1C = R1 - 155 mm.
C5
Advertisement
Table of Contents
