C5
CHECKS: LOW PRESSURE FUEL SUPPLY CIRCUIT
[1] Ø 10 mm low pressure connector
[2] Ø 8 mm low pressure connector
[3] Pressure gauge for testing boost pressure
[4] Extension
Connect the tool [1] between the booster pump and the fuel filter (white mark at "a" on
the fuel supply pipe).
Connect the tool [2] downstream of the diesel injectors, between the high pressure fuel
pump and the fuel filter (green mark at "b" on the fuel return pipe).
WARNING: Any check of pressure downstream of the fuel filter is PROHIBITED.
NOTE: To check the pressures while the vehicle is being driven, insert tool [4] between
tool [3] and tools [1] et [2].
Checks on pressure: static.
Switch on ignition.
For 3 seconds (normal functioning):
- Fuel supply pressure shown by the pressure gauge [3] = 2.6 ± 0.4 bar.
- Fuel return pressure shown by the pressure gauge [3] = 0.6 ± 0.4 bar.
B1BP27BD
192
Engine: 4HX
Tools.
: 4215-T
: 4218-T
: 4073-T
Kit 4073 -T
: 4251-T