C5
[1] Gauge for measuring radius of wheels (4 bolts)
[2] Gauge for height under bodyshell
[3] LEXIA station
[4] PROXIA station
Preliminary operations.
Check the level of LDS fluid (see corresponding operation).
Check the tyre pressures.
Place the vehicle on a 4 column lift.
Put the vehicle in the normal position.
Release the handbrake.
Start the engine.
AXLE GEOMETRY: CHECKING AND ADJUSTING VEHICLE HEIGHT
Tools.
: 8006-T
: 2305-T
: 4171-T
: 4165-T
Checks by axle.
Lift the vehicle by hand.
Release when the weight becomes too great.
The vehicle descends, then re-ascends and stabilises.
Meaure the height.
Push down the vehicle by hand.
Hold the vehicle in this position, release when it rises.
The vehicle ascends, then descends and stabilises.
Measure the height.
Take the average of the 2 measures.
260