Setting At Reference Height; Requirements Prior To Setting At Reference Height; Tooling Required - CITROEN C5 2005 Service Manual

Hide thumbs Also See for C5 2005:

Table of Contents

WARNING: The checks of the front and rear axle geometry values, as well as the adjusting of the front suspension should be carried out

at precise positions of suspension compression (reference height) on a suspension test bed.

Check the pressures in the tyres.

Check the conformity of the tyres.

Remove the wheel trims.

Lock the steering rack at point zero: straight ahead (see corresponding operation).

[1] Set of two compressors

[2] Set of two shackles

[3] Set of four straps

[4] Set of two slings

[5] Under body height gauge

AXLE GEOMETRY

Setting at reference height