AUXILIARY EQUIPMENT DRIVE BELT
[1] Ratchet spanner FACOM (1/2" square)
[2] Reduction box FACOM S.230 (1/2" - 3/8" square)
Removing.
Move aside the power steering oil low pressure pipe flange.
Pivot the support (1) of the tensioner roller clockwise, as far as it will go, using tools [1] and [2].
Remove the auxiliary drive belt.
B1EK0VAD
IMPERATIVE: Check the operation of the rollers (no play, no tight spot).
Refitting.
Position the auxiliary drive belt.
Commence with the crankshaft pulley (2).
Finish with the tensioner roller (3).
Free the support (1) of the tensioner roller, pivoting it anti-clockwise, using tools [1] and [2].
ESSENTIAL: Check that the belt is correctly positioned in the grooves of the various pulleys.
Continue the refitting operations in reverse order to removal.
B1EK0VBD
Engine: XFW
Tools.
99
C8