Calculating The Rear Height H2C; Adjustment Of Heights; Mechanical Pre-Adjustment - CITROEN C5 2005 Service Manual

C5
AXLE GEOMETRY: CHECKING AND ADJUSTING VEHICLE HEIGHT
Measuring the rear height H2M.
The rear height H2M is measured between the ground and zone «a» on the crossmember.

Calculating the rear height H2C.

All types except CARLSSON CARLSSON
H2C = R2 + 64 mm.
H2C = R2 + 68 mm.
R2 = Radius of rear wheel (mm)
R2 = Radius of rear wheel (mm)
Compare:
B3DP08HC
- The value measured H2M.
- The value calculated H2C.
- Adjust the front height if necessary.

Adjustment of heights.

Adjustment using a diagnostic tool.
This adjustment is done when the heights measured are within the tolerance of the heights calculated.

Mechanical pre-adjustment.

This adjustment is done when the heights measured are not within the tolerance of the heights calculated
(± 10 mm).
B3CP06CC
262