Table of Contents
Advertisement
CHECKING THE VALVE TIMING
Checks.
Turn the crankshaft in the normal direction of rotation.
Line up the black markings «b» and «c» on the chain with the teeth «a» and «d»
of the camshaft drive pinions (40 turns of the camshafts maximum).
IMPERATIVE: If it is impossible to line up the markings on the chain with the camshaft
drive pinions, repeat the setting of the camshafts (see operation: removing-refitting of
camshafts).
B1EP1FND
Peg:
- The crankshaft, using tool [2].
- The camshaft pinion, using tool [3].
IMPERATIVE: Should it be impossible to peg the camshaft, check that the offset
between the camshaft hole and the pegging hole is not more than 1 mm (use a screw
7 mm in dia.).
If the offset is more than 1 mm, repeat the operation to set the timing
(see corresponding operation).
Remove tools [1] and [3].
B1BP31FC
165
Engines: RHL - RHR
C5
Advertisement
Table of Contents
