Without aircon
[1] Pliers for removing plastic pegs
Remove the belt.
Detension the belt (3) by turning the tensioner roller (1), by the screw (2)
(anti-clockwise).
WARNING: the screw (2) has a left hand thread.
Remove the belt (3), while keeping the tensioner roller (1) tensioned.
Refit the belt.
Compress the tensioner roller (1).
Fit the belt (3).
Release the tensioner roller (1).
Tensioner roller screw (4)
Guide roller screw (5)
B1BP23PC
AUXILIARY EQUIPMENT DRIVE BELT
Engine: 6FZ
Tool.
Tightening torques (m.daN).
B1BP23QC
95
: 7504-T
: 2 ± 0,2
: 3,5 ± 0,3
B1BP23PC
B1BP23RC
C5
With aircon