Table of Contents
Advertisement
CHECKING AND SETTING THE VALVE TIMING
C5
Engines: RHL - RHR
Turn the tensioner roller (clockwise), using a hexagonal spanner at «e».
Position the index «d» opposite the notch «f».
Tighten:
- The screw (12) of the tensioner roller (17) to 2,1 ± 0,2 m.daN.
- The auxiliaries drive pulley to 7 ± 0,7 m.daN.
Remove tools [3] and [6].
Rotate the crankshaft two times (in the direction of rotation of the engine).
Refit tools [2] and [3].
Check the position of the index «d», it should be opposite the notch «f».
IMPERATIVE: If the position of the index «d» is not correct, restart the operations to tension the
timing belt (for this, slightly slacken the screw (12) of the tensioner roller).
B1EP1FKC
172
Advertisement
Table of Contents
