Table of Contents
Advertisement
C5
B1EP15ED
CHECKING AND SETTING THE VALVE TIMING
Setting the valve timing (continued).
Position tool [1] on the belt at «b».
Turn the tensioner roller (24) (anti-clockwise) using tool [2] to attain a tension
of:
Tighten screw (23) of the tensioner roller, tighten to 2.5 m.daN.
Remove one screw (25) from the pinion (29) (to check that the screws are not
against the end of the buttonhole).
Tighten the screws (25) to 2 m daN.
Remove tools [1], [2], [3] and [5].
Rotate the crankshaft 8 times (normal direction of rotation).
Fit the tool [3].
Loosen screws (25).
Fit tool [5].
Loosen screw (23) (to free the tensioner roller (24)).
Fit tool [1].
Turn the tensioner roller (24) (anti-clockwise),using tool [3], to attain a tension
of:
Tighten:
- The screw (23) of the tensioner roller (24) to 2,5 ± 0,2 m.daN.
- The screws (25) to 2 ± 0,2 m.daN.
178
Engine: 4HX
106 ± 2 SEEM units.
51 ± 3 SEEM units.
Advertisement
Table of Contents
