Crankshaft Bearing; Perform The Following Operations - CITROEN C5 2005 Service Manual

C5
B1BP2D3D
SPECIAL FEATURES: TIGHTENING TORQUES (m.daN)
NOTE: Maximum length under heads for screws M11 = 131,5 mm.
NOTE: Maximum length under heads for screws M8 = 119 mm.

Perform the following operations:

- Brush the screw threads.
- Refit the screws having first pre-coated them with «MOLYKOTE G
RAPID PLUS» grease on the threads and under heads.
Check the presence of the eight centring pins
Pre-tighten the screws M11 (sequence from 1 to 8)
Pre-tighten the screws M8 (sequence from A to H)
Tighten the screws M6 (sequence from a to 1)
Slacken the screws M11 and M8
Proceeding screw by screw
Tighten the screws M11 (sequence from 1 to 8)
Angular tightening
Tighten the screws M8 (sequence from A to H)
Angular tightening
46
Engine: XFU
8

Crankshaft bearing

3 ± 0,3
1 ± 0,1
1 ± 0,1
Yes
3 ± 0,3
180°
1 ± 0,1
180°