SPECIAL FEATURES : TIGHTENING TORQUES (m.daN)
Lubrication circuit
Oil pump
Stage 1 : Position the screws and do them up by hand.
Stage 2 : Pre-tighten the screws
Stage 3 : Tighten the screws
Stage 4 : Repeat the tightening a few times in the same order to obtain
a tightening torque of 0,8 m.daN on all the screws.
Engine : XFW
B1BK3B6D
Respect the sequence of stages and the order of tightening
: 0.5
: 0.8
71
Cooling circuit
Coolant pump
Stage 1 : Position the screws and do them up by hand.
Stage 2 : Pre-tighten the screws
Stage 3 : Tighten the screws
Stage 4 : Repeat the tightening a few times in the same order to obtain a
tightening torque of 0,8 m.daN on all the screws.
C8
B1BK3B7D
: 0.5
: 0.8