B1BP270D
B1BP272D
AUXILIARY EQUIPMENT DRIVE BELT
Engine: 4HX
[1] Dynamic tensioner compressure lever
[2] Peg Ø 4 mm
Remove.
WARNING: Mark the direction of fitting in case the belt is to be reused.
Compress the tensioner roller (1) by action at «a» (anti-clockwise), using tool [1].
Peg at «b», using tool [2].
Remove the auxiliaries drive belt.
Refit.
Refit the auxiliaries drive belt.
Compress the tensioner roller (1) by action at «a» (anti-clockwise), using tool [1].
Remove the tool [2] at «b».
105
Without air conditioning
Tools.
: (-).0188.Z
: (-).0188.Q1
C5