Headlamp Beam Height Adjustment - CITROEN C4 CACTUS 2016 Handbook

Guide-me-home
lighting
Automatic
When the automatic illumination of headlamps
is activated, if the ambient light level is
low, the dipped beam headlamps come on
automatically when switching off the ignition.
Activation or deactivation of the system, as well
as the period for the guide-me-home lighting is
set in the touch screen tablet.
F Select the "Driving assistance"
menu, then "Vehicle settings".
Manual
The temporary illumination of the dipped beam
headlamps after the vehicle's ignition has been
switched off makes the driver's exit easier
when the light is poor.
Switching on
F With the ignition off, "flash" the headlamps
using the lighting stalk.
F A further "headlamp flash" switches the
function off.
Switching off
The manual guide-me-home lighting switches
off automatically after a set time.
Lighting and visibility
Headlamp beam
height adjustment
To avoid causing a nuisance to other road users,
the height of the headlamp beams should be
adjusted according to the load in the vehicle.
0. Driver only
or driver + front passenger.
-. Driver + front passenger + rear
passengers.
1. Driver + front passenger + rear passengers +
load in the boot.
-. Driver + front passenger + rear passengers +
load in the boot.
2. Driver only + maximum authorised load in
the boot.
This position is sufficient to avoid causing dazzle.
Higher settings may limit the spread of light from
the headlamps.
The initial setting is position "0".
4
85