Installing A Hot-Plug Power Supply - Compaq PROLIANT DL760 User Manual

5-10 Compaq ProLiant DL760 Servers User Guide

Installing a Hot-Plug Power Supply

The ProLiant DL760 server ships with either one or two hot-plug power
supplies depending on the model. The system power in the ProLiant DL760
server does not have to be shut off to replace one of the power supplies.
WARNING: To reduce the risk of electric shock or damage to the equipment:
I
Install the power supply before connecting the power cord to the power
supply.
I
Unplug the power cord before removing the power supply from the server.
To replace a hot-plug power supply with the system power on:
1. Remove the power cord from the power supply to be replaced and
release the power cord clamp.
Figure 5-6. Removing power cord