102-342 Event Queue Empty
Event queue empty
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel
Status Indicator RAPs
102-342, 102-343
(PL
18.2)
102-343 Invalid Class
Invalid class
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel
09/03
2-602
(PL
18.2)
Initial issue
DC 3535/2240/1632, WC M24