Rep 7.15 Tray 4 (3Tm); Rep 7.16 Tray 2 Feeder (3Tm) - Xerox DocuColor 2240 Service Manual

REP 7.15 Tray 4 (3TM)

Parts List on PL 15.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Pull out Tray 4.
2. Lift end of tray to disengage lock on rail (not visible) and remove tray.
Repairs and Adjustments
REP 7.15, REP 7.16
WARNING

REP 7.16 Tray 2 Feeder (3TM)

Parts List on PL 15.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Pull out Tray 2.
2. Open the Left Cover (PL 15.10) and remove the Left Lower Cover
3. Remove the Tray 2 Feeder (Figure
2
Release the
Wire Harness
from the Clamp
and discon-
nect the P/J
3
Remove Screws (2) and
the Feeder
Figure 1 Removing the Tray 2 Feeder
09/03
4-66
WARNING
(REP 14.12).
1).
1
Loosen Screw
and move the
Bracket
DC 3535/2240/1632, WC M24
Initial issue