No Object - Xerox DocuColor 2240 Service Manual

102-362 No Object

Object non-existence
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel
Status Indicator RAPs
102-362, 102-363
(PL 18.2)
102-363 Invalid ID
Incorrect ID
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel
09/03
2-612
(PL 18.2)
Initial issue
DC 3535/2240/1632, WC M24