102-202 Request Queue Full
The event that requires more than the processing capability for the request arising in the Panel
has occurred.
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the ESS PWB
Status Indicator RAPs
102-202, 102-203
(PL
13.1)
102-203 Send Request Queue Full Debug
Data cannot be sent from the Panel to the Controller.
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the ESS PWB
09/03
2-582
(PL
13.1)
Initial issue
DC 3535/2240/1632, WC M24