12-969 IOT Top Tray Full
The Top Tray Full Sensor has detected full status for 10 sec.
Procedure
Enter
dC330
[012-215] and press Start. Position some paper near the Top Tray Full Sensor
(Figure
1), then move the paper away. The display changes.
Y
N
Press Stop. Check the circuit of the Top Tray Full Sensor
RAP for troubleshooting procedure.
Press Stop.
•
Ensure that the connectors shown in the circuit diagram
nected and that the wires are not damaged.
•
Replace the Top Tray Full Sensor
(PL
•
If the problem persists, replace the Finisher PWB
Top Tray Full
Sensor
Figure 1 Component Location
Figure 2 12-969 RAP Circuit Diagram - Top Tray Full Sensor
Status Indicator RAPs
12-969
(Figure
2). Refer to the
(Figure
2) are securely con-
17.4)
(PL
17.13)
(Figure
3).
OF 99-1
09/03
2-300
Figure 3 Finisher PWB
DC 3535/2240/1632, WC M24
Initial issue