Xerox DocuColor 2240 Service Manual page 1115

Chain-Link Name
741-112 IBT Motor Reverse Switch
3535 only
741-113 PR Motor Reverse Switch
3535 only
741-114 Reverse time
3535 only
741-115 Threshold for PV Counter
3535 only
741-113 PV Counter for Drive
3535 only
General Procedures and Information
741--xxx Drive NVM List
Table 1 Chain 741
Default Range Description
1 0~1 Switch to reverse IBT Motor rotation at job end
0=Disable; 1=Enable
0 0~1 Switch to reverse PR Motor rotation at job end
0=Disable; 1=Enable
13 12~25 Time from the reverse rotation-start signal until the reverse rotation-disabling signal (10 msec/bit)
IBT: Time of step-up + constant speed
PR: Time from On to Off of Reverse rotation port
(Excluding time of step-down and stop)
200 1~65535 Reverse rotation interval by PV
0 0~65535 Total PV from the previous reverse rotation
09/03
6-24
Initial issue
DC 3535/2240/1632, WC M24